Silicon Labs Digital Isolation Solution Enhances Long-term Reliability of Motor Controls

by donpedro

Silicon Labs introduced the industry’s first digital CMOS-based drop-in replacement solution for optocoupler-isolated gate drivers (opto-drivers). Supporting up to 5 kV isolation ratings and up to 10 kV surge protection, the new Si826x isolated gate drivers provide an ideal configuration, package and footprint fit for a wide range of opto-drivers used in high-power motor control, industrial drives, solar power and EV/HEV inverters, and switched mode and uninterruptible power supplies.
Failure-prone opto-drivers are a weak link in motor controls and other industrial power systems that require long-term reliability, extended warranties and fail-safe operation for up to 20 years. Opto-drivers are inherently limited by their inferior LED-based technology, which is subject to large output variations over input current, temperature and age. These variations are eliminated by using Si826x isolated gate drivers. Less variability, especially in input turn-on current, simplifies system design since developers no longer need to anticipate aging effects. Higher reliability and longer device lifetime also allow system manufacturers to support longer warranties and reduce costs associated with product repair or replacement.
Based on Silicon Labs’ proven digital isolation technology, the Si826x family is a pin- and footprint-compatible functional upgrade solution for commonly used opto-driver products. Si826x isolated gate drivers emulate the behavior of opto-drivers by modulating a high-frequency carrier instead of light from an LED. This simpler digital architecture provides a robust isolated data path that requires no special considerations or initialization at start-up. While the input circuit mimics the characteristics of an LED, the Si826x devices require less drive current, resulting in higher efficiency. The propagation delay time of Si826x devices is independent of the input drive current, resulting in consistently short propagation times (25ns), smaller unit-to-unit variation and greater input circuit design flexibility.
The propagation delay and skew of Si826x isolated gate drivers is ten-times lower than opto-drivers, which improves response time for feedback loops and enhances system efficiency.

Silicon Labs
www.silabs.com/isolation

Related Articles

Leave a Comment