Murata announces the availability of the DFE32CAH_R0 series of metal power inductors high-temperature applications of up to 150 °C. Intended for use in DC/DC converters and power management circuitry for automotive applications, these components are supplied in 1210 inch size (3.2 mm × 2.5 mm) metal cores. Covering a wide inductance value range, the components […]
READ MOREBy featuring a three-terminal arrangement, the NFM15HC435D0E3 exhibits a significantly lower equivalent series inductance (ESL) than would be expected with two-terminal components. This means that stable circuit operation can be supported, while significantly reducing the mounting area required (with a footprint of just 1.0 mm x 0.5 mm). In order to achieve the industry-leading capacitance, Murata has […]
READ MOREMurata has expanded its portfolio of positive temperature coefficient (PTC) surface-mount chip thermistors for overheat sensing by introducing the PRF03BB541NB7RL. These thermistors are optimised for incorporation into various forms of consumer electronic products and equipment such as wearable technology, smartphone handsets and tablets. Supplied in a 0201 format (with 0.6mm × 0.3mm × 0.3mm dimensions), they present […]
READ MOREMurata introduces the ultra-thin LW reversed, low equivalent series inductor (ESL) multilayer ceramic capacitor (MLCC) with a capacitance value of 1.0 µF ±20% for 4 Vdc-rated automotive applications. With a 0204 inch size (0.5 × 1.0 mm) footprint and maximum thickness of just 0.22 mm, the LLC152D70G105ME01 decoupling capacitor can be implemented on the back of […]
READ MOREMurata has announced the release of the BLM18KN_EH series of ferrite chip beads for noise suppression in power lines at temperatures up to 175°C. Target applications are automotive equipment such as engine and transmission electronic control units (ECUs) and turbo motor controllers, with the components meeting AEC-Q200 qualification requirements. As electrification advances, the demand for […]
READ MOREMurata today announced the BLM18SP_SH1 series of surface mount ‘chip’ ferrite beads constructed in a 1608 (1.6 mm × 0.8 mm) package designed specifically for automotive applications. As the amount of electronics-based automotive systems continues to increase, so does the need to reduce the potential for electromagnetic interference to impact safe operation. Many of the new […]
READ MOREMurata has now begun volume production of two new multi-layer ceramic capacitors (MLCCs). Each of these components exhibits low levels of equivalent series inductance (ESL) and is targeted at automotive implementation. Supplied in a 0402 format (with 1.0 mm × 0.5 mm dimensions) and providing a 1 μF capacitance, the NFM15HC105D0G3 is the world’s smallest […]
READ MOREMurata has announced the release of the BLF03VK series ( https://www.murata.com/en-eu/products/info/emc/emifil/2019/0722) of ultra-compact noise filters specifically designed for the 5 GHz band, one of the frequency ranges used in Wi-Fi (wireless LAN) communications. The filters are the first in the world to have a specified, guaranteed impedance value at 5 GHz. The 5 GHz band […]
READ MOREMurata announces the wire-wound common mode choke coil (CMCC) DLW32SH101XF2, ( https://www.murata.com/en-eu/products/productdetail?partno=DLW32SH101XF2%23) which is the world’s first CMCC to support the most challenging requirements of differential to common mode rejection (DCMR) Class 3. As a result, the new device fulfils the IEC62228-3 requirement for use in CAN FD, the flexible data rate version of CAN […]
READ MOREMurata announce the availability of their new BLM18DN_SH series of noise filter ferrite beads. The new devices are specifically designed for automotive networks using Power over Coaxial (PoC) with high impedance, high frequencies and supporting large currents, up to 1400 mA. As vehicles become more complex and sophisticated and especially as a result of increased […]
READ MORE