Power Integrations, in association with Weltrend Semiconductor Inc., announced a joint reference design describing an 18 W, USB PD compliant, AC-DC power converter targeted at chargers for smart mobile devices. The design, titled DER-567, pairs the WT6630P USB Type-C PD controller from Weltrend with Power Integrations’ InnoSwitch™-CP off-line CV/CC flyback switcher IC, enabling designers to produce a compact and highly energy-efficient standards-compliant power adapter.
Weltrend’s WT6630P USB PD controller is certified by USB Implementers Forum (USB-IF) for USB Type-C and is compatible with the USB PD 2.0 baseband communication protocol. The Weltrend device reduces the BOM by combining Type-C cable detection circuits, USB PD physical layer (PHY), and components related to system-level protections such as over-voltage protection (OVP), over-current protection (OCP), and over-temperature protection (OTP).
By providing a constant power output, Power Integrations’ InnoSwitch-CP switcher IC allows battery-operated devices to draw maximum power from the charger at any selected output voltage, optimizing charge time and cost. InnoSwitch-CP ICs use the company’s innovative FluxLink™ technology, eliminating the need for an optocoupler and enabling secondary-side control that delivers fast transient performance, exceptional CV/CC regulation and very low no-load power consumption. FluxLink technology also enables easy implementation of safe synchronous rectification, resulting in an extremely efficient power supply.
Power Integrations | www.power.com
Weltrend Semiconductor | www.weltrend.com