MIMO Linearizer Paves the Way for Greener Network Deployments

by donpedro

Maxim_SC2200_Image_SDesigners can now achieve lower power, cost, and size of the RF front-end with the SC2200 dual-channel RF power amplifier linearizer (RFPAL) from Maxim Integrated Products, Inc.
The linearizer enables power amplifiers to consume up to 70% less power compared to operation in back-off. In addition, it reduces the bill of materials (BOM) cost by up to 50%, and is up to 8x smaller than other digital pre-distortion (DPD) solutions on the market. The SC2200 application, which occupies less than 1 square inch of board space, substantially increases power amplifier efficiency while consuming less than 1.5W when both paths are fully operational. This allows manufacturers to realize significant competitive advantages and helps operators meet their requirements for lowered operating and deployment costs.
With cellular data traffic increasing exponentially, the communications industry is migrating from voice-centric macro networks to heterogeneous networks with improved coverage and capacity. The SC2200 is a superior alternative to the inefficient method of operating power amplifiers in back-off, and is preferred over DPD since it requires no software or complex algorithm development. It features an integrated pre-amp and a single 1.8V supply, and works optimally for a wide range of power amplifier architectures, technologies, and power levels. The linearizer is suitable for 2G, 3G, and 4G systems, including TD-LTE and FD-LTE. It is ideal for cellular infrastructure applications such as macro and small cell base stations, distributed antenna systems (DAS), active antenna systems (AAS), remote radio heads, and other multiple-input multiple-output (MIMO) systems.

Key Advantages

  • Excellent performance: Meets stringent spectral emission and error vector magnitude (EVM) regulatory requirements
  • Lower power consumption: Consumes up to 70% less power compared to a 37dBm power amplifier operated in back-off
  • Reduced BOM cost: Reduces BOM cost by up to 50% compared to a DPD system
  • Smaller size: Offers 8x smaller size than other DPD solutions on the market


The SC2200, based on field-proven RFPAL technology that has been deployed in millions of base stations, is already being used in early stage 5G systems utilizing massive MIMO antenna arrays,” said Elina Todorov, Business Manager at Maxim Integrated. “The SC2200 provides higher integration and functionality over previous generations, enabling base station vendors to substantially reduce system costs.”

Availability and Pricing

  • Available in an 11mm × 11mm SAWN QFN package
  • Specified over the -40°C to +100°C temperature range
  • Evaluation kits are available: SC2200-EVK900, SC2200-EVK1900 and SC2200-EVK2400
  • Pricing available upon request

2016 IEEE International Microwave Symposium (IMS2016)
The SC2200 will be displayed at Maxim’s Booth #314 at IMS2016 in San Francisco, CA (May 24-26, 2016), http://bit.ly/IMS2016_Maxim
To view Maxim’s portfolio of RFPAL products, visit http://bit.ly/RFPAL_Product_Portfolio_Maxim

Maxim Integrated

Related Articles

Leave a Comment