Flex Power Modules has added to its PKU-D series of low-profile sixteenth-brick DC-DC converters with the PKU3913D, a 100 W rated part with an extended input range down to 30 V and regulated output of 12 V/8.3 A. The intended application is for nominal inputs of 48 V or 54 V with possible long cable […]

Flex Power Modules is introducing the BMR350, a quarter-brick, non-isolated DC/DC converter rated at 860 W continuous and 1200 W peak power, ideal as an intermediate bus converter for powering processors and ASICs with peak power demands. The product features an input of 40-60 V (80 V/100 ms) and a fully regulated output of 12 […]

Flex Power Modules is introducing its PKU4116HD through-hole DC/DC converter, with 36-60 V input (80 V peak) and fully-regulated 55 V output. The open-frame module is in the industry-standard 1/16th brick format, 33.02mm x 22.86mm x 9.8mm, and is rated at 110 W/2 A output to 50°C ambient with natural convection, and to 85°C with […]

Flex Power Modules introduces the BMR310, a non-isolated switched capacitor intermediate bus converter (IBC) which provides high power density for data centers, thus improving board space utilization and freeing space for other components. Built on the proprietary Zero voltage switching Switched capacitor Converter (ZSC) technology of Infineon Technologies AG (FSE: IFX / OTCQX: IFNNY), the BMR310 […]

Flex Power Modules introduces the BMR482, its second generation of direct conversion isolated DC/DC converter. By converting directly from a 48 V supply to the load voltage  without an intermediate stage, the BMR482 delivers increased efficiency in a compact package, enabling it to meet the higher power needs of today’s data centers and cloud computing. […]

Flex Power Modules introduces the BMR474, a high power density, digital non-isolated Point of Load (PoL) regulator. Due to its vertically mounted SIP (Single Inline Package) design, the BMR474 saves valuable board space, while being able to deliver up to 80 A output current, with a maximum power output of 198 W. Designed for telecom and […]

Flex Power Modules announces the BMR685, the first digital DC/DC converter for Radio Frequency (RF) Power Amplifiers in the half-brick form factor that can provide continuous output power of up to 1300 W.

Flex Power Modules, a pioneering manufacturer of DC/DC power converters, announces the launch of the BMR492 – a series of digital eighth-brick intermediate bus converters capable of delivering between 600 to 800W of continuous power along with a peak power of up to 1100 W for short periods <1s. This so-called ‘burst mode’ operation is commonly […]

Flex Power Modules has introduced a new device in its BMR491 series of high-density DC/DC converters with built-in digital interfaces. The new BMR491  converter can deliver 2450 W peak power for periods of up to one second, with a continuous output power rating of up to 1540 W, thus making it the highest power density […]

Continuing to extend its portfolio of high-density DC/DC converter solutions with built-in digital interfaces, Flex Power Modules introduces two variants of the new BMR491 series. Aimed at deployment in next generation data centers striving to meet increasingly stringent efficiency benchmarks, these advanced converters include versions that leverage the company’s proprietary hybrid regulated ratio (HRR) technology. […]