ATmega328PB is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega328PB achieves throughputs close to 1MIPS per MHz.
The ATmega328PB is supported with a full suite of program and system development tools and this bundle includes an ATmega328PB Xplained Mini evaluation kit, an ATATMEL-ICE development tool and an ATPOWERDEBUGGER Power Debugger kit.
The ATmega328PB Xplained Mini (ATMEGA328PB-XMINI) evaluation kit is a hardware platform for evaluating the ATmega328PB microcontroller. It comes with a fully integrated debugger that provides seamless integration with Atmel Studio. The kit provides access to the features of the ATmega328PB MCU enabling easy integration of the device into a custom design. The kit features two capacitive buttons for easy evaluation of the integrated QTouch® Peripheral Touch Controller (PTC).
The Atmel-ICE (ATATMEL-ICE) is a development tool for debugging and programming ARM Cortex-M based SAM and AVR microcontrollers with on-chip debug capability. It offers programming and on-chip debugging of all AVR 32-bit MCUs on both JTAG and aWire interfaces, programming and on-chip debugging of all AVR XMEGA family devices on both JTAG and PDI 2-wire interfaces, JTAG and SPI programming and debugging of all AVR 8-bit MCUs with OCD support on either JTAG or debugWIRE interfaces, programming and debugging of all SAM ARM Cortex-M based MCUs on both SWD and JTAG interfaces and programming of all tinyAVR 8-bit MCUs with support for the TPI interface.
The Power Debugger kit (ATPOWERDEBUGGER) is a tool for debugging and programming AVR microcontrollers using UPDI, JTAG, PDI, debugWIRE, aWire, TPI or SPI target interfaces and ARM Cortex-M based SAM microcontrollers using JTAG or SWD target interfaces. In addition, the Power Debugger has two independent current sensing channels for measuring and optimizing the power consumption of a design. It also includes a CDC virtual COM port interface as well as Data Gateway Interface channels for streaming application data to the host computer from a SPI, USART, TWI or GPIO source. The Power Debugger is a CMSIS-DAP compatible debugger which works with Studio 7.0 or later, or other frontend software capable of connecting to a generic CMSIS-DAP unit. It streams power measurements and application debug data to Data Visualizer for real-time analysis.
For your chance to win this Microchip ATmega328PB Development Suite Bundle, visit :
www.microchip-comps.com/eaziin-328pb
and enter your details in the online entry form.