Deutschmann Automation, the specialist for industrial data communication, presents an embedded version of the new generation of the UNIGATE FALCON protocol converter/gateway series that can be immediately integrated. The compact communication solution UNIGATE FALCON Embedded quickly and easily provides an Industrial Ethernet or fieldbus interface.
The embedded version of the UNIGATE FALCON series can be integrated directly into existing final products as a complete module without a housing. Thanks to the low installation height of approximately 25mm, the embedded version is also suitable for installation situations where space is limited, and a redesign of the existing electronics is not planned. In addition, this embedded solution is suitable for applications that do not allow or should avoid DIN rail mounting of a separate or external protocol converter or gateway.
Mounting of the UNIGATE FALCON Embedded is via four fixing holes, which also allow individual mounting even within the product housing. The position and dimensions of the holes are identical in all bus versions. The module is simply wired within the product, whereby the device configuration or programming can be used. The electronics of the final product do not need to be adapted or changed.
The compact embedded version of the UNIGATE FALCON series can be directly integrated into final products without any development effort and is therefore also ideally suited for small series production. By using the ready-to-run solution, design time and time-to-market of the individual automation solution can be significantly optimized.
The UNIGATE FALCON protocol converter/gateway series is of modular design with the aim of realizing the best possible solution for the respective application. The option of cascading is of course also retained with UNIGATE FALCON Embedded.
In addition to the well-known embedded solutions UNIGATE IC/IC2 from Deutschmann Automation, UNIGATE FALCON Embedded offers a further alternative for integrating an Industrial Ethernet or fieldbus interface directly into the terminal device.
Visit Deutschmann Automation at the embedded world in Nuremberg in hall 2, stand 140 and at the Hannover Fair in hall 9, Embedded Park F76/2.