Xilinx® Zynq® UltraScale+™ SoC module with two memory channels

14 AUGUST 2018

Enclustra MercuryTM XU5 SoC module: more interfaces for the PL

The Mercury XU5 SoC module from Enclustra is an extremely powerful all- rounder. Based on the Xilinx Zynq UltraScale+ MPSoC, it features 6 ARM cores, a Mali 400MP2 GPU, up to 10 GByte of extremely fast DDR4 SDRAM, numerous standard interfaces, 178 user I/Os and up to 256,000 LUT4 equivalents. Thanks to two independent storage channels – one on the PS and one on the PL – it achieves memory bandwidths of up to 24 GByte/sec.

The Mercury XU5 MPSoC module from FPGA specialists Enclustra features more direct interfaces to the FPGA fabric, in addition to a Gigabit Ethernet connection as well as up to 2 GByte DDR4 SDRAM. The module, with dimensions of just 56 × 54 mm, has up to 8 GByte DDR4 ECC SDRAM connected directly to the processing system, 16 GByte eMMC flash memory as well as various standard interfaces, such as Gigabit Ethernet, USB 3.0, a display port, SATA and SGMII. Both the processing system and the FPGA matrix boast four PCIe® Gen2/3 connections.

The Xilinx Zynq UltraScale+ MPSoC is manufactured in a 16 nm FinFET+ process and comes equipped with 6 ARM cores – four 64-bit ARM CortexTM- A53 with a clock rate of up to 1333 MHz as well as a 600 MHz fast 32-bit ARM® dual-core CortexTM-R5. The processors are supported by a MaliTM 400MP2 GPU and a H.264/H.265 video codec (EV variants).

Reference design and Linux at the push of a button
Enclustra offers broad design-in support for their products. With the Mercury PE1-200 baseboard, the Mercury XU5 is a powerful development and prototyping platform.

Further expansion options are provided by the LPC FMC connector on the PE1 base board, which is compatible with a wide range of plug-in cards from various manufacturers – ADCs, DACs, motor control cards and RF links are just a small selection of the possibilities on offer.

Enclustra also offers a comprehensive ecosystem for the XU5, offering all of the hardware, software and support materials required. Detailed documentation and reference designs make it easy to get started, in addition to the user manual, user schema, a 3D-model (STEP), PCB footprint (Altium®, OrCAD®, PADS®, EAGLE®) and differential I/O length tables.

The Enclustra Build Environment can be used to compile the Enclustra SoC modules with an integrated ARM processor very smoothly. The module and base board are selected by a graphical interface. Afterwards, the Enclustra Build Environment downloads the appropriate Bitstream, First Stage Boot Loader (FSBL) and the required source code. Finally, U-Boot, Linux and the root file system, which is based on BusyBox, are compiled.

Thanks to the family concept with compatible connectors, different types of modules can be used on the same base board. If, for example, an ARM processor is not required, the Mercury KX1 FPGA module can be used on the same base board instead.

Enclustra | www.enclustra.com

Leave a Reply

Your email address will not be published. Required fields are marked *

  • We use your personal data ONLY to respond to your comments/requests.
  • To receive responses that are appropriate to your requests, we may transfer your email address and your name to the author of the article.
  • For more information on our Privacy Policy and Personal Data Processing, please visit the page: Privacy Policy (GDPR) & Cookies.
  • If you have any questions or concerns regarding the way we process your personal data, you can contact our Data Protection Officer at: gdpr@esp2000.ro
  • Subscribe to our magazine newsletter